Our new BX2 Dual Outlet Bluetooth® Tap Timer allows watering for your whole garden. The dual outlet is water restriction friendly and allows you to make adjustments from the comfort of your own mobile. Easily choose from different watering durations, flexible scheduling and interval watering, all from the iGardener™ App.
For FAQ and support, please visit our help centre
| Outlets: 2 |
| Material | Plastic |
|---|---|
| Colour (Tap Timer) | Grey |
| Weight | 0.468kg |
| Water Rating | IP54 |
| Water Pressure | 50kPa – 800kPa |
| Water Flow | 1L/min – 25L/min |
| Cordless | Yes |
| Wireless | Yes |
| Auto Shut Off | Yes |
| Battery Back-Up | Yes |
| Digital Display | No |
| Hose-End Compatible | Yes |
| Manual Bypass | Yes |
| Maximum Cycle Time (min) | 1439 |
| Number of Cycles | 3 |
| Number of Zones | 2 |
| Odd/Even Day Program | Yes |
| Water restriction friendly | Yes |
| Programmable | Yes |
| Range from Tap Timer to mobile | 20m |
| Batteries Required | 4 x AA |
| LED pattern | Meaning |
|---|---|
| Red/Blue alternate flash | Start up pattern (recognition of batteries/power) |
| Blue flash 3 times | Start up complete |
| Quickly flashing blue (10 times) | Updated over Bluetooth |
| Single blue flash | Response to pressing button – manual on or off |
| Blue flash 0.5 seconds on, 20 seconds off | Watering |
| Purple (pink) flash on start up | Start up error – press Bluetooth button (start/stop) to clear |
| Purple (pink) solid light | Error – reset device to clear |
| Red light on start up Red flash 0.5 seconds on, 15 seconds off | Low battery warning – timer is not able to operate normally in this mode. Replace batteries. |
| Red Flash 3 times | Start button pressed when dial is in ‘OFF’ position Start button pressed when timer is in low battery mode |
Resetting the BX Tap Timers:
Before a hard reset, we recommend that the timer is removed from the iGardener app – use the ‘bin’ icon at the top of the page to remove the highlighted tap timer prior to reset –
BX1 hard reset – remove battery compartment for 2min, press and hold button as you push the compartment back in, device will flash blue quickly, let go of button. Add timer back into iGardener.
BX2 hard reset – move dial to ‘OFF’, press and hold the button, watch for 3 quick red flashes, let go of button. Add timer back into iGardener.
BX4 hard reset – move dial to ‘OFF’ press and hold the button, watch for 3 quick red flashes, continue to hold for 6 seconds, 3 more red flashes will occur, let go of button. Add timer back into iGardener.
Preparing tap timers for winter
Had problems since the day I brought them cost me over $1000.00 alot more trying to keep my garden looking nice but has never looked any good since putting your product on my property 2 year of stuffing around with this faulty product not a happy garnder at all don't waste your money
We have had our console for about a month. Noticed a couple of weeks ago there was lots of water on the floor near the tap. Ran the taps and it’s leaking from the console.
Hi Kylie, I'm sorry to hear that you're experiencing leaking with your Bluetooth Tap Timer. This is certainly not what should be expected from our products, and I understand how frustrating this must be for you.
To help troubleshoot the issue and find a solution, please get in touch with our customer service team at support@holmanindustries.com.au, and they will be happy to assist you further.
Thank you,
Kimberly
Holman Team
Purchased September 2022 for front lawn and garden.
Easy setup and worked great although only used both zones on manual timer setting.
Decided to set a 7 day cycle, instructions clear but nothing would start. Called customer support - thank you to Chris who was most patient and helpful.
We were programming app correctly but when installed had mistakenly left timer dial to OFF instead of RUN (which still allows manual settings to work)
Make sure dial is on RUN.
Works perfectly.
Now purchasing BX1 for rear garden.
Many thanks again to Chris.
Had this for a few weeks now. It works for a couple of days then stops working. I have to delete the product from the iGardener app and then reinstall and set watering times again in order to get it working. Only to repeat the process again in a couple of days.
Hi Tdee, thank you for bringing to our attention the issue you have been experiencing with your Bluetooth® Tap Timer. We're sorry to hear that you've been having trouble with it. We understand how frustrating it can be when a product doesn't work as expected, and we want to do everything we can to help.
We recommend that you get in touch with our customer service team at support@holmanindustries.com.au. They will be able to provide you with personalised support and work with you to resolve the issue you are experiencing with your Tap Timer.
Again, we apologise for any inconvenience this has caused you.
So easy to use.
So simple to set up
Works really well.
Would definitely buy another to control front yard.
Take full control of your garden watering and lighting with a Bluetooth® connection and a tap of your iPhone or Android. Our BX2 Dual Outlet Tap Timer is built for the iGardener™ smartphone app!
No products in the cart.
