EzyGrip Pool Filler Tap Timer
The Holman EzyGrip Pool Filler Tap Timer comes with a 12mm snap-on hose fitting, so you can easily connect it to a standard hose. Leave the tap and pool unattended while it fills up for the dialled amount of time. The maximum run time is 2hrs, meaning no more having to worry about overfilling the pool this Summer.
The EzyGrip Pool Filler Tap Timer has a manual override and non-slip rubber dial for easy adjustment.
1. Screw inlet securely onto a garden tap.
2. Connect garden hose or poly pipe fittings to the outlet(s).
3. Turn the large dial to the required watering run time. (time starts to count down immediately)
4. Turn on the tap.
Warning: Do not use in freezing conditions.
Before winter or snow remove your timer from the tap to avoid the unit from freezing.
|Pressure (kPa)||Water Volume (LPM)|
<iframe title=”YouTube video player” src=”https://www.youtube.com/embed/xUjpPASF08Y” width=”560″ height=”315″ frameborder=”0″ allowfullscreen=”allowfullscreen”></iframe>
<strong>Preparing tap timers for winter</strong>
<li>Be sure you check with your local water authorities for any sprinkler bans</li>
<li>We recommend either reducing the watering time or turning it off completely</li>
<li>In really cold climates, we suggest that you remove the battery and make sure there is no water left inside the tap timer</li>
<li>If you live in an area that gets frost, we recommend taking off the tap timer completely and storing it away for the meantime</li>