WaterWhiz™ 200 Tap Timer

Holman Water Whiz Advanced 2 has two outlets and each outlet has separate programming and can be set to water at different times, days and duration, all completely individual giving you a wide range of watering options. It has large buttons and a large angle display making it very easy to read and use, each program has a run time from 1 minute to 6 hours and is also very easy to switch to manual watering. Ideal for any garden that requires battery operated automatic watering.

  • Water some areas a little, and some a lot
  • Wide range of watering options
  • Easily set different schedules for each day
  • Manual watering options available
  • Flexible and intuitive programming
  • 7-day individual day and interval selection
  • 1min to 6hr long run time for low pressure systems
  • Larger easy to press buttons
  • Large LCD display
  • Easy to read angle display
  • 2-year limited warranty
1 customer review

SKUCO4002 Category Tags,
Close

Additional information

Tap Timer

Digital Tap Timer

Close

Manual

Close

FAQ

FAQ

I have attached my unit to the tap and there is water running from the outlet, how do I stop this?

  • You will need to close the solenoid manually. Select the AUTO setting and pressing the MANUAL button. Press the ‘plus’ button to enter a run time (1-min) and let this time elapse. This will close the solenoid once the time has run. You may need to select the ZONE on multiple outlet timers by pressing the ZONE button to select the correct outlet that is running.

My timer is not coming on at the scheduled time.

  • Be sure you have not selected a DELAY time. With your timer in AUTO mode, press the ‘plus’ button to check the DELAY time is on 0.

I am trying to manually run ZONE 2 but my timer keeps reverting to ZONE 1

  • Press the MANUAL button and use the ‘minus’ button to set the RUN time in ZONE 1 to zero. Press your ZONE button to select the correct ZONE and enter the run time for that ZONE.

My timer shows it is watering but there is no water coming thru?

  • There may be an airlock in the system. Disconnect the timer and reset it. Flush your irrigation system before attaching to the timer again.

Why is the water still running after my program has finished?

  • There may be a pressure issue with your system. The use of a pressure reducer, attached at the tap, before the timer, will assist in this situation.

Zone 1 is working fine, but the other zones are not watering.

  • Please check the programming to ensure a START time and a RUN time have been set for each of these ZONES.

How do I reset my timer?

  • Press and hold the OK button till the time is reset to 7.00am. The unit will be in default settings now.

Is it OK to use my timer over winter?

  • We do not recommend the use of your timer over the winter period. It will not handle low temperatures, below 3 degrees Celsius may damage the timer.
  • We advise the timer to be removed over the winter period, or allowed to drain if left on the tap.
Close

Reviews (1)

1 review for WaterWhiz™ 200 Tap Timer

5 star
100%
4 star
0%
3 star
0%
2 star
0%
1 star
0%
  1. bill clark

    I purchased the waterwhiz 200 just over 12 months ago and it is still has the original batteries I put in it and it is still working perfectly. Would highly recommend these timers to anyone interested.

    1 out of 1 people found this helpful. Was this review helpful to you?
Add a review

Your email address will not be published. Required fields are marked *

Separate programming for up to 2 areas: You can water on different schedules in up to two areas. So you can water your lawn twice a day, and a newly planted flower bed once. The easy programming gives you control over when, where and how often you water.

Multiple options for watering: All watering needs are covered from maintenance of lawn to the care of delicate flowers. Also includes scheduling abilities for watering from sprinklers, drip systems and more.

Unique daily schedules: Even when away from the home, watering conservatively is simple. By setting a unique timer for each day, you can be flexible in how, when and where you water; keeping on top of your water restrictions and mixed plantings.

Water manually: Washing the footpath, cleaning the car and other outdoor tasks are a breeze when switching to manual watering. With the press of a button, no timer adjustment is needed.

Water Whiz Tap Timer Header

Tech Specs

  • Product Code: CO4002
  • Outlets:
  • Max. Cycle Time: 360min
  • Material: Plastic
  • Batteries: 4× AA (Alkaline only)
  • Packaging Dimensions: 110mm × 280mm × 230mm
  • Product Dimensions: 110mm × 180mm × 160mm
  • Product Weight: 550g
  • Bunnings Fine Line: 3111076

Features

  • Water some areas a little, and some a lot
  • Wide range of watering options
  • Easily set different schedules for each day
  • Manual watering options available
  • Flexible and intuitve programming
  • 7-day individual day and interval selection
  • 1min to 6hr long run time for low pressure systems
  • Double o-ring connections
  • Larger easy to press buttons
  • Large LCD display
  • Easy to read angle display
  • 2 year limited warranty