Tap Timers pre 2013

Tap Timers pre 2013

Share Button

Find detailed information about CO1701, CO1705, CO1801, CO1805, CO1905b & CO1905RSR.
Follow the tabs below to find your controller and its manual and further information.

CO1801

Description

The Holman Tap Timer is designed to be fitted to a standard tap and control the water flow to any hose or watering system connected to it. The timer allows true set & forget watering. The patented 2 dial programming with enter button, allows easy set up for your individual needs.

This unit is ideal for watering any residential application. Best suited for small garden areas, hanging baskets & pots. It will turn on & off as programmed while your at home, work or play!

Left Hand Locking Nut – Provides an effective seal against any potential leaking join as the fittings “self tighten” when they are attached to the tap.

Download the Manual for the CO1801 Tap timer

HOLMAN CO1801 Tap Timer – Programming Video

CO1805

Description

Single outlet, Battery operated tap timer with splash cover.

The Holman Programmable Tap Timer is designed to be fitted to a standard tap and control the water flow to any hose or watering system connected to it. The programming method of the unit is quite simple. The interface consists of 4 programming buttons & an LCD display that shows what has been set as you go step by step through the programming loop.

Splash Cover – This protective boot provides a barrier against the ingress of water to the front of the unit, reduces the damaging effects of UV sunlight & also provides great protection against impact.

Durable Construction – Made from UV resistant plastics, containing reliable components and a high torque motor, this unit has strong inbuilt qualities.

Download the Manual for the CO1805 Tap timer

HOLMAN CO1805 Tap Timer – Programming Video

CO1905B

Description

The Holman Programmable Square Tap Timer is designed to be fitted to a standard tap and control the water flow to any hose or watering system connected to it. The timer allows true set & forget watering. The intuitive 4 button programming, allows easy set up for your individual needs. This unit is ideal for watering any residential application. Best suited for small garden areas, hanging baskets & pots. It will turn on & off as programmed while your at home, work or play!

Slow Closing Ball Valve – The ball valve takes about 10 seconds to gradually shut off the water flow through the timer. This reduces the damage that can be caused by water hammer, (the sudden shut off of water flow). Instructions – For best results use 2 x AA size, GOOD quality, ALKALINE BATTERIES ONLY. To install tap timer hand tighten the tap connector to the tap outlet to seal against the rubber washer. (Use adaptor bush for different size taps). Warning – Do not use in freezing conditions. Before winter or snow, remove your timer from the tap to avoid the unit from freezing.

Download the Manual for the CO1905B Tap timer

CO1905RSR

Description

The Holman Programmable Tap Timer with Rain Sensor Cup is designed to be fitted to a standard garden tap and control the water flow to any hose or watering system connected to it. The rain sensor cup now plugs directly into the timer allowing an automatic cut off feature when watering is suspended due to rain periods. Programmed watering will resume when the sensor has dried out and the garden needs more water. The timer’s programming method is quite simple. The interface consists of 4 programming buttons & an intuitive LCD display. The display shows what has been set as you go, step by step through the programming loop. Rain Sensor Ready RSR is an abbreviation for HOLMAN’S “Rain Sensor Ready” technology. The latest range of HOLMAN tap timers have been specifically designed with RSR technology to give the end user, greater flexibility with their irrigation system. Equipped with a rain sensor cup, the timer is able to suspend watering during wet periods. This reduces over watering along with saving water & money.

Rain Sensor Cup: The sensor is very easy to install! It simply plugs in. The timer comes pre-wired to the rain sensor cup with 3.5 metres of cable. The sensor itself can be mounted in many ways. The most important point is to ensure it is in a suitable location, clearly exposed to the sun, wind & rain. The cup will dry out depending on the weather. When it detects watering is required, it will allow the programmed starts to commence and continue to water the garden. Splash Cover: This protective boot provides a barrier against the damaging effects of UV sunlight & also provides great protection against impact. Durable Construction: The timer is made from UV resistant plastics, containing high strength gears with stainless steel bearings and a high torque motor. This timer has strong inbuilt qualities and is built for the harsh Australian environment. Now That’s Smart Watering!

Download the Manual for the CO1905RSR Tap timer

CO1701

Download the Manual for the CO1701 Tap timer

CO1705

Download the Manual for the CO1705 Tap timer