Metal Spike - Elbow

Metal Spike – Elbow

Share Button
7012H Metal Spike with 13mm Barbed Elbow
7013H Metal Spike with 19mm Barbed Elbow

The new range of Holman metal sprinkler spikes are an excellent choice when looking for a strong, reliable metal irrigation system. This spike is best suited for use in garden beds or landscaped areas. The elbow shape allows the spike to be installed at the end of a length of poly pipe and pushed directly into the soil. Featuring a barbed end, this spike design is able to be set up in minutes, by simply pushing on the poly pipe & clamping with a ratchet clamp. The spikes are supplied “without” spray heads so you are able to attach the style that best suits your watering requirements. Watering options: The 1/2″ outlet offers a variety of different sprinklers to be connected. Commonly, an impact sprinkler is attached & the barbed end joined into the end of the poly pipe. Available in both 13mm barb & 19mm barb sizes,the Elbow Spike is ideal for branching off from a mainline or terminating an inline section of poly pipe as it runs through a garden bed. Use to branch off to water trees & shrubs for large landscaped areas. Pop up sprinklers are also a good option! It’s very common for a sprinkler to have a female 1/2″ thread and they can screw directly onto the spike. These also offer a neat solution with the nozzle protected inside the sprinkler cannister.
Pop ups have a range of fixed or adjustable nozzles so any spray pattern can be found. Using a pop up on a spike, gives you the flexibility of locating this sprinkler where it’s needed & then being able to easily move & re-locate the sprinkler as the plants grow. A lot easier than moving a rigid sub-surface plumbed system. The last option is attaching a poly riser with a spray head. This provides a “tall” sprinkler option and suits most garden bed applications. The height allows the spray to reach “over” the plants to fully water the surrounding area or garden bed. For any of these sprinkler installations onto the Holman metal spike. Simply screw directly onto the ½” BSP male thread and clamp down on the rubber washer to seal. Each Holman metal spike features a strong 4 sided rib, which allows installation into hard, dry or harsh soil conditions a lot easier. All along keeping the sprinkler standing firm and steady.

ihose15m

Product Code: 7012H
Brand: HOLMAN