How to use the Smart Function


There are two types of Smart scenes/scenarios available:

  1. Tap-to-Run scenes
  2. Note: Currently only iOS 12.0 and above iOS systems can use the "Add to Siri" feature

  3. Automation scenes
  4. These are scenes that have a trigger – they will only run when a condition or a set of conditions is met
    Note: Automation scenes can be run manually using Google/Alexa voice control. Siri cannot not run Automation scenes manually
For a WX8 device
You may want to ask Google/Alexa/Siri to water Zones 1 to 8 manually. The only way to do this is to setup Tap-to-Run scenes for Zones 1 to 8 so that you can ask:
You may also want to setup Start A, Start B and Start C as Tap-to-Run scenes.

Note: You cannot water Zone 1 and then Zone 2 in the same scenario – it is not possible to stack zones as tasks. The only way it can be done is to put the zones you wish to water in either Start A, B or C and then turn on that Start in the Task area.

For a RGB Garden Light device
You may want to ask Google/Alexa/Siri to display the current colour or display the current scene. The only way to do this is to setup Tap-to-Run scenes to display the current colour or display the current scene so that you can ask:


Smart Tap-to-Run: Turn on the Current Light Scene

Smart Automation: Turn the Light on at Sunset

Smart Automation: Turn the Light off at Sunrise


Smart Automation: Send an App Notification when the WX1 Tap Timer Battery needs Replacing

Smart Automation: Setup a Watering Schedule for the WX1 Tap Timer that also Sends an App Notification when the Watering Starts


Smart Tap-to-Run: Water Zone 1 manually

Smart Automation: Water Zone 1 @ 7am on Sun, Tue, Thu & Sat


Edit, Disable/Enable, Reorder, Review Logs and Delete your Smart Scenarios

Need more help?

Visit www.support.holmanindustries.com.au

Last updated : 9 February 2021